Page 155 - index

Cam & Groove Fittings

Cam and Groove

Dixon

Features:
• precision machined to rigid tolerances
• durable stainless steel cam arm pins will not rust or bind, for greater strength and safety
• recess holds gasket frmly in place - ensures proper placement
• long shank design allows proper banding, thus eliminating the major cause of hose damage

Operation of Cam and Groove

1. To make connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down.
2. Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter.

Ordering System
200 - A - AL
material
style
size

Size represents the coupler or adapter and hose or pipe end. (i.e. 200 = 2") If the coupling is a reducing size, the coupler or
adapter is the frst size. (i.e. 4030-C is 4" coupler to 3" hose shank).
Q

Specific tions on Dixon Cam and Groove

Specifications
• Dixon cam and groove couplers and adapters are produced to interchange with all product produced to Commercial Item
Description A-A-59326B.
• No standard exists for the ½" and 8" fttings, and generally these sizes do not interchange with other manufacturers.
• Dust caps and dust plugs are not to be used in pressure applications for safety and environmental reasons.
• Designed for use with liquids, consult Dixon for specifc recommendations.

Pressure Ratings:
Recommendations based on the use of mating Dixon fttings at ambient temperature (70°F) with standard Buna-N Seal
installed. For use at elevated temperature or other unusual operating conditions, consult the factory. Dixon, Boss-Lock
and EZ Boss-Lock couplers and adapters maximum working pressure are as follows:
Size ½" ¾" thru 2" 2½" 3" 4" 5" and 6" 8"
PSI 150 250 150 125 100 75 50

All dimensions are in inches unless otherwise noted. Engineering dimensions are available upon request.
Specifcations are subject to change without notice.

Dixon Sanitary 2014 800.789.1718 153