BVC3 Series – 3 Way, High Pressure Ball Valves in T and L Port Configurations

Holmbury BVC3 ball valves are designed to suit a wide range of applications including mobile plant and industrial equipment. These valves should not be used as flow control valves and should therefore always be fully open or fully closed.
BVC 3 ball valves are available from stock in T & L port configurations.(Pleasea check availability of T-ported ball valves when ordering).

BVC2 Series – 2 Way, High Pressure Ball Valves

Holmbury BVC2 ball valves are designed to suit a wide range of applications including mobile plant and industrial equipment. These valves should not be used as flow control valves and should therefore always be fully open or fully closed.

CV Series – Check Valves

One-way valve for in-line use. Suitable for any type of hydraulic system using liquids that are not highly viscous. The standard types are in zinc plated carbon steel and are therefore especially suitable for non-corrosive mineral based oils and liquids.

Holmbury check valves are available in sizes from 1/4″ – 2″ in various cracking pressures. Some pressures maybe be more readily available than others, please contat us to find out or click the link below for technical information.

VPC Series – Hose Burst Valves

Used to prevent the uncontrolled descent of a load in the event of a hose failure, these valves should be screwed directly into the lifting device (normally a cylinder), or into an in-line manifold that should be mounted as close as possible to the lifting device.

VPC Series – Hose Burst Cartridges

The hose burst cartridges are designed to used in a similar way to the valve except they can be fitted internally on threads in manifold blocks instead of attached before the hose, minimising potential leak points on the system.

DPOCW Series – Weldable Dual Pilot Operated Check Valves

Holmbury’s DPOCW Series or weldable block as it is commonly know is a dual pilot operated check valve with a body made from weldable carbon steel. The block was designed to be fitted onto hydraulic cylinders where it can be welded to the outside of the cylinder with two fixed pipes, The advantage is it keeps the system very strong, neat and compact. The weldable block is available in 1 size with 3/8″ ports.

PC Series-  Spool valve with joystick operation

Holmbury’s PC Series pattern changer spool valve is designed to switch joystick functionality on equipment such as excavators. When operators move from one machine to another, they can set-up the joystick controls to function in a familiar format. This reduces re-training time,  limits accidents caused by unfamiliar controls and avoids the need to switch hoses. The pattern changer is hand operated and has four inlet ports and four outlet ports. It provides 8-way, two position control of pilot signals.

BALL VALVES

BVS 2 Series – 2 Way Stainless Steel Ball Valves

Holmbury BVS 2 way stainless steel ball valves are designed for use in corrosive environments and applications that a normal standard carbon steel coupling may not. Stainless steel valves are available in in sizes ranging from 1/4″ – 2″

BVS 3 Series – 3 Way Stainless Steel Ball Valves in T and L Port Configuration

Holmbury BVS 3 way stainless steel ball valves are available in T & L port configurations. The Stainless steel valves are designed for systems subject to corrosive fluids or environments. The valves are made from complete AISI 316 stainless steel and is fitted with Viton seals as a standard. Available in sizes from 1/4″ – 2″.

CVS Series – Stainless Steel Check Valves

CVS Series stainless steel check valves are designed for in-line use and are suitable for any type of hydraulic system using liquids that are not highly viscous. They are suitable for use with mineral oil, acids, gas and de-mineralized water.