Page 27 - index

Clamp Fittings A

Clamp Gaskets

Features:
Gasket material approved by (3A), USDA and complies with FDA's 21CFR177.2600 and 1550. PSI Service Ratings for the
sanitary clamps DO NOT APPLY to connections (1" and above) using any PTFE gaskets, due to the potential for cold fow under
normal operating conditions. PTFE gaskets, when used with any clamp, are likely to leak at pressures far below the published
service ratings. This restriction does not apply to the fractionally sized ½" and ¾" connections, due to their recessed, fully
contained design.

Mini Standard - type 1 Flanged - type 2

Buna-N Clamp Gaskets - Black

Size Part Number
½" 42MP-U50
¾" 42MP-U75
1" 40MP-U100
1½" 40MP-U150
2" 40MP-U200 Type 1 - Standard Type 1 - Standard
1" and larger
½" - ¾"
2½" 40MP-U250
3" 40MP-U300 Features:
• color code: red dot
4" 40MP-U400 • meets 21CFR 177.2600
5" 40MP-U500
6" 40MP-U600
8" 40MP-U800

Buna-N Clamp Gaskets - White

Size Part Number
½" 42MP-UW50
¾" 42MP-UW75
1" 40MP-UW100 Type 1 - Standard Type 1 - Standard
1½" 40MP-UW150 ½" - ¾" 1" and larger
2" 40MP-UW200 Features:
2½" 40MP-UW250 • color code: red dot
3" 40MP-UW300 • meets 21CFR 177.2600
4" 40MP-UW400
6" 40MP-UW600
EPDM Clamp Gaskets - Black

Size Part Number
½" 42MP-E50
¾" 42MP-E75
1" 40MP-E100 Type 1 - Standard Type 1 - Standard
1½" 40MP-E150 ½" - ¾" 1" and larger
2" 40MP-E200 Features:
2½" 40MP-E250 • color code: three green dots
3" 40MP-E300 • peroxide cured
4" 40MP-E400 • meets 21CFR 177.2600
5" 40MP-E500 • passed U.S.P. Class VI Cytotoxicity testing
6" 40MP-E600

Note: see pages 33-34 for sizing charts / refer to pages 271-273 for compatibility information
Dixon Sanitary 2014 800.789.1718 25