Page 282 - index

Technical

Part Number Descriptions

2 = Elbow (unpolished, polished, clamp, 90°, 45°, 31 = Concentric Reducer (unpolished, polished,
U-bend, sweep, etc.) clamp, etc.)
7 = Tee (unpolished, polished, clamp, reducing, 32 = Eccentric Reducer (unpolished, polished,
etc.) clamp, etc.)
9 = Cross (unpolished, polished, clamp, reducing, 38 = Flange
etc.) 40 = Gaskets (1" and above)
13 = Clamp (single pin, squeeze, double pin, 3 42 = Gaskets (½" and ¾)
segment, bolted, I-line, lightweight, etc.) 45 = Check Valve (spring, ball, air blow)
14 = Ferrule (short, long, auto weld, tank, roll on, 51 = Butterfy Valve
hose adapter, male I-line, plain bevel seat/ 54 = Sight Glass
John Perry) RG = Hex tube hanger with rubber grommets
15 = Ferrule (bevel seat threaded or I-line female) RGC = Hex tube hanger with rubber grommets and
16 = End Cap (clamp, weld, I-line, bevel, etc.) coupler
17 = Adapter ((bevel to clamp, I-line to clamp, etc.) PS = Hex tube hanger with ABS sleeves
19 = Adapter (tube O.D. to national pipe thread) PSC = Hex tube hanger with ABS sleeves and
21 = Male Adapter (bevel, clamp, I-line to male pipe coupler
thread) RPH = Round tube hanger with Buna inserts
22 = Female Adapter (bevel, clamp, I-line to female RPHC= Round tube hanger with Buna inserts and
pipe thread) coupler
23 = Thermometer (bevel, clamp, I-line, etc.)
24 = Hanger (hex, round, etc.)
28 = Y or lateral (unpolished, polished, clamp,
reducing, etc.)

Fittings Ordering Information

Material Designation:
G - 304
R - 316L
Size:
½" = 050 3" = 300
¾" = 075 4" = 400
1" = 100 6" = 600
1½" = 150 8" = 800
2" = 200 10" = 1000
2½" = 250 12" = 1200

Ordering Example:
B 3 1 1 4 M P - G 1 5 0 1 0 0

Description:
Concentric reducer with clamp ends in 304 material 1½" by 1"

Z 280 800.789.1718 Dixon Sanitary 2014